Lenovo ThinkStation P3 Tiny 매뉴얼 - 페이지 17

{카테고리_이름} Lenovo ThinkStation P3 Tiny에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo ThinkStation P3 Tiny 37 페이지. Storage configurator
Lenovo ThinkStation P3 Tiny에 대해서도 마찬가지입니다: 매뉴얼 (7 페이지)

페이지 인쇄

Section 4 – Installing SATA Drives in

P3 Tower

The ThinkStation P3 Tower can hold a maximum of four SATA drives. The P3

Tower motherboard has four SATA port connections, labelled SATA1, SATA2,

SATA3, and SATA4 (eSATA) in the order they show up in the system BIOS.

Figure 7 - P3 Tower Motherboard with SATA Callouts

Note: The ability to maximize the number of SATA drives is dependent upon

using a "3rd HDD enclosure" or "Front-Access Storage Enclosure" (FASE),

depending on CPU SKU and fan cooler (See Table 2 & Figures 8 & 9).

SATA port 4 is an eSATA port. This port is capable of hot-swapping SATA

drives after the feature is enabled in BIOS, found under Devices→Storage

Setup→"SATA Drive 4 Hot-Plug Support"→Enable/Disable.

Due to the external accessibility of the FASE, Lenovo recommends only using

the hot-swap feature with the FASE bay. Lenovo strongly recommends against

accessing internal drives/components while the system is operating.