Lenovo ThinkStation P3 Tiny Посібник - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник для Робочий стіл Lenovo ThinkStation P3 Tiny. Lenovo ThinkStation P3 Tiny 37 сторінок. Storage configurator
Також для Lenovo ThinkStation P3 Tiny: Посібник (7 сторінок)

Друкувати сторінку

Section 4 – Installing SATA Drives in

P3 Tower

The ThinkStation P3 Tower can hold a maximum of four SATA drives. The P3

Tower motherboard has four SATA port connections, labelled SATA1, SATA2,

SATA3, and SATA4 (eSATA) in the order they show up in the system BIOS.

Figure 7 - P3 Tower Motherboard with SATA Callouts

Note: The ability to maximize the number of SATA drives is dependent upon

using a "3rd HDD enclosure" or "Front-Access Storage Enclosure" (FASE),

depending on CPU SKU and fan cooler (See Table 2 & Figures 8 & 9).

SATA port 4 is an eSATA port. This port is capable of hot-swapping SATA

drives after the feature is enabled in BIOS, found under Devices→Storage

Setup→"SATA Drive 4 Hot-Plug Support"→Enable/Disable.

Due to the external accessibility of the FASE, Lenovo recommends only using

the hot-swap feature with the FASE bay. Lenovo strongly recommends against

accessing internal drives/components while the system is operating.