Lenovo 7Z46 매뉴얼 - 페이지 6

{카테고리_이름} Lenovo 7Z46에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 7Z46 8 페이지. Toolless friction rail v2
Lenovo 7Z46에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지)

Install Front Mounting Bracket to Rack

Step 1. Open the front bracket and align the front end of the outer rail to

the holes in the rack. Ensure that the front end and rear end of the rail are

at the same horizontal level.

Step 2. Pull the outer rail in the direction as shown until the pins are

inserted into the corresponding holes.

Step 3. Close the front bracket to lock the rail in position.

Note: When install the rail to the vertical rack, use left rail as top rail, and

right rail as bottom rail. Installation methods are the same in both racks.

6 6

Install Rear Screws (optional)

If you want to ship the rack with the

server installed or place the rack in a

vibration-prone area, install the M6

screws into the rear of the rails.