Lenovo 9360-4PX 설치 매뉴얼 - 페이지 28

{카테고리_이름} Lenovo 9360-4PX에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 9360-4PX 42 페이지.

Using a flat-blade screwdriver

Complete the following steps to install a cage nut with a flat-blade screwdriver.

Figure 18. Installing cage nuts with a flat-blade screwdriver

1. Determine the hole in which you want to install the cage nut.

2. Hold the cage nut in one hand and compress the cage-nut clip with a flat-blade screwdriver.

3. With the clip compressed, push the edge of the cage nut fully into the hole from the inside of the

rack-mounting flange.

4. Release the screwdriver pressure on the clip to lock the cage nut into place.

The racks come with space on the sides that can be used to vertically mount power distribution units (PDUs)

and console switches. The racks come with six locations, three on each side of the rack. See the

documentation that comes with your PDU or console switch for detailed instructions for installing a device

vertically in a rack.