Lenovo Flex System x222 Compute Node 제품 설명서 - 페이지 22

{카테고리_이름} Lenovo Flex System x222 Compute Node에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo Flex System x222 Compute Node 33 페이지.

Supported switches

The following table shows which Ethernet, Fibre Channel, and InfiniBand switches are supported:
Table 11. Supported switches
Adapter
Switches supported
EN2092 1Gb Ethernet Scalable Switch (49Y4294)
EN4093 10Gb Scalable Switch (49Y4270)*
EN4093R 10Gb Scalable Switch (95Y3309)
Embedded 10 GbE
Virtual Fabric
CN4093 10Gb Converged Scalable Switch
Adapter
(00D5823)
SI4093 System Interconnect Module (95Y3313)
EN4023 10Gb Scalable Switch (94Y5212)
FC5022 16Gb SAN Scalable Switch (88Y6374)
FC5022 24-port 16Gb SAN Scalable Switch
FC5024D 4-port
(00Y3324)
16Gb FC Adapter
FC5022 24-port 16Gb ESB SAN Scalable Switch
(90Y9356)
IB6132D 2-port
IB6131 InfiniBand Switch (90Y3450)
FDR InfiniBand
Adapter
* Withdrawn from marketing
** Product Guides for Flex System switches can be found at:
http://www.redbooks.ibm.com/portals/puresystems?Open&page=pg&cat=switches
† Product Guides for the Flex System FC5022 SAN Scalable Switch can be found at:
http://www.redbooks.ibm.com/abstracts/tips0870.html
‡ A switch upgrade is not required to activate the necessary ports. However, to run the ports at FDR speeds, you
need the FDR upgrade 90Y3462.
The following switches are not supported by the x222 because they do not provide enough internal ports
to connect to both servers in the x222 Compute Node:
Flex System EN4091 10Gb Ethernet Pass-thru Module
Flex System FC3171 8Gb SAN Switch
Flex System FC3171 8Gb SAN Pass-thru
Flex System EN6131 40Gb Ethernet Switch
Cisco Nexus B22 Fabric Extender
For more information, see the list of Product Guides in the Adapter cards category at the following
website:
http://www.redbooks.ibm.com/portals/puresystems?Open&page=pg&cat=switches
Flex System x222 Compute Node
Switch upgrades
Switch port licenses can be used
for internal or external ports using
flexible port mapping or using
Dynamic Ports on Demand.
Additional ports may be needed
depending on your configuration.
See the switch Product Guide**
Switch port licenses can be used for
internal or external ports. Additional
ports may be needed depending on
your configuration. See the FC5022
Product Guide†
No upgrade required‡
22