Lenovo ThinkSystem SR650 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} Lenovo ThinkSystem SR650에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo ThinkSystem SR650 14 페이지. -48 v dc

Before installing a hot-swap power supply, touch the static-protective package that contains the new hot-

swap power supply to any unpainted surface on the outside of the server. Then, take the new hot-swap

power supply out of the package and place it on a static-protective surface.

To install a hot-swap power supply, complete the following steps:

Watch the procedure. A video of the installation process is available:

• Youtube:

https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_

• Youku:

http://list.youku.com/albumlist/show/id_50483444

Step 1.

If the server is in a rack, adjust the cable management arm (CMA) to gain access to the power

supply bay.

If you have installed the 2U CMA Upgrade Kit for Toolless Slide Rail or Toolless Slide Rail Kit with

2U CMA, do the following:

Figure 7. CMA adjustment

a. Press down the stop bracket

b. Rotate the CMA out of the way to gain access to the power supply bay.

and rotate it to the open position.

1 1 1 1