Lenovo Tripp Lite 2U 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Lenovo Tripp Lite 2U에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo Tripp Lite 2U 19 페이지. Rack server

For rack with square-shaped or circle-shaped holes

Rack Rear

Installing the rear end of the rails in a rack with

non-threaded holes.

Note: The non-threaded holes on the rack will

either be square-shaped or circle-shaped.

Choose one of the rails for installation. By facing

the front side of the racks, line up the pins on the

rear of the rail with either the square-shaped or

circle-shaped holes on the rear of the rack. Push the

rail so that the pins go into the holes and latches

into place.

Installing a 2U server into the rack

Square-shaped holes

Circle-shaped holes

Rack Front

Installing the front end of the rails in a rack with

non-threaded holes.

Pull the rail forward and insert the pins 1 on the

front of the rail into either the square-shaped or

circle-shaped holes on the front of the rack. Drop

the rail down until it latches into place.

Repeat steps 1 and 2 to install the other rail. Make

sure that each rail is securely engaged in the rack.

Go to step 3.

Square-shaped holes

Circle-shaped holes