Lenovo Tripp Lite 2U Installation Instructions Manual - Page 3

Browse online or download pdf Installation Instructions Manual for Server Lenovo Tripp Lite 2U. Lenovo Tripp Lite 2U 19 pages. Rack server

Print Page

For rack with square-shaped or circle-shaped holes

Rack Rear

Installing the rear end of the rails in a rack with

non-threaded holes.

Note: The non-threaded holes on the rack will

either be square-shaped or circle-shaped.

Choose one of the rails for installation. By facing

the front side of the racks, line up the pins on the

rear of the rail with either the square-shaped or

circle-shaped holes on the rear of the rack. Push the

rail so that the pins go into the holes and latches

into place.

Installing a 2U server into the rack

Square-shaped holes

Circle-shaped holes

Rack Front

Installing the front end of the rails in a rack with

non-threaded holes.

Pull the rail forward and insert the pins 1 on the

front of the rail into either the square-shaped or

circle-shaped holes on the front of the rack. Drop

the rail down until it latches into place.

Repeat steps 1 and 2 to install the other rail. Make

sure that each rail is securely engaged in the rack.

Go to step 3.

Square-shaped holes

Circle-shaped holes