Lenovo 10QX-PAR1-WW 사용자 설명서 - 페이지 28

{카테고리_이름} Lenovo 10QX-PAR1-WW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 10QX-PAR1-WW 49 페이지.

페이지 인쇄

Touch Screen

Touch screen will optimize your monitor experience. Please use with OS like Windows 7/10.

•

You can use either single finger touch, or multi-finger touch up to maximum simultaneous

10 touch points.

•

To activate touch functionality, you need to connect USB cable to your computer in DP

mode. You don't need USB cable when select AIO mode.

•

You do not need to install any other software.

Procedures

Left edge swipe

Right edge swipe

Finger slide

Single Tap/Double Tap

Note:

•

Do not touch the screen with sharp objects, it may result in damage, and void warranty.

•

Do not push hard, or rest anything on the glass surface (if in horizontal position) as it will

damage the screen and void warranty.

•

Please keep your hands clean and dry before touching the screen to ensure fluid touch

operation.

•

The touch function works only on OS and applications which can support touch function.

Take the steps outlined below to wake up the system and display when the latter is in standby

mode:

AIO mode

Tiny PC running and display off: move your mouse or tap the screen to wake up your PC.

2. Tiny PC in standby mode and display off: click the mouse, tap the screen, press the power

button on the front of the monitor, or press the power button on the Tiny PC to wake up

your PC.

Tiny PC in sleep mode and display off: press the power button on the front of the monitor,

or press the power button on the Tiny PC to wake up your PC.

DP mode

PC running and display off: move your mouse or tap the screen to wake up your PC.

PC in standby mode and display off: click the mouse, tap the screen, or press the power

button on the Tiny PC to wake up your PC.

PC in sleep mode and display off: press the power button on the Tiny PC to wake up your

PC.

Note: Turn on the wake on touch function, the power consumption will increase in sleep mode.

See

"Using the Wake on touch Function"on page 2-10

Swipe from the left edge of the screen to shuffle your running apps.

Swipe from the right edge of the screen to launch the Charm bar.

Slide your finger to scroll up and down and slide your finger to pan the

screen left or right.

Touch the target on the screen with one finger tip for one/two quick

taps, then release.

to turn on the wake on touch function

Descriptions

Chapter 2.

2-13