Lenovo IdeaCentre B300 하드웨어 교체 매뉴얼 - 페이지 16
{카테고리_이름} Lenovo IdeaCentre B300에 대한 하드웨어 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo IdeaCentre B300 23 페이지. Fc san switch
Lenovo IdeaCentre B300에 대해서도 마찬가지입니다: 공지 사항 (4 페이지), 제품 설명서 (23 페이지)
페이지 인쇄
Removing the computer cover
To remove the computer cover:
Note: For this procedure, it helps to place the computer face-down on a soft
flat surface. Lenovo recommends that you use a blanket, towel, or other soft
cloth to protect the screen surface from scratches or other damage.
1. Remove any media (diskettes, CDs, or memory cards) from the drives, shut
down your operating system, turn off all attached devices, and the computer.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer. Refer to "Locating connectors on the rear of the computer".
4. Remove the computer stand. Refer to "Removing the computer stand".
5. Lift up the computer cover gently from the bottom right corner
the cover from the setscrews
31043502_B3_HRG_EN_V1.0.indd 13
.
2
2
2
2
1
2
2
2
2
2
Hardware Replacement Guide
to release
2010.4.14 4:13:45 PM