Lenovo RackSwitch G8272 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Lenovo RackSwitch G8272에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo RackSwitch G8272 7 페이지.
Lenovo RackSwitch G8272에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (24 페이지), 제품 설명서 (32 페이지)
페이지 인쇄
Configure the Switch
Configure the Ports
1. Login to the switch.
2. Run the commands below to configure the port settings for the switch. The interface you select will depend
on how you've connected to the switch.
enable
configure device
interface <management|ethernet> <1/1>
no bridge-port
ip address <IP|DHCP>
flow control <sent|receive> <on|off>
exit
Create a VLAN
1. Login to the switch.
2. Run the commands below to create the switch VLAN(s).
enable
configure device
vlan <ID NUMBER>
Add VLAN(s) to Switch Ports
1. Login to the switch.
2. Run the commands below to add the VLAN(s) to specific switch ports.
enable
configure device
interface ethernet <PORT NUMBER(S)>
bridge-port mode access
bridge-port access vlan <VLAN ID NUMBER>
exit
3. You can verify the VLAN port assignment with the below command.
display vlan
©
Scale Computing 2018
6