Lenovo RackSwitch G8272 빠른 시작 매뉴얼 - 페이지 4
{카테고리_이름} Lenovo RackSwitch G8272에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo RackSwitch G8272 7 페이지.
Lenovo RackSwitch G8272에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (24 페이지), 제품 설명서 (32 페이지)
![Lenovo RackSwitch G8272 빠른 시작 매뉴얼](/uploads/products/server2/7306834/7306834.jpg)
Setup the Switch for Remote Access
Configure the IP Information
1. Login to the switch using either option in the
2. Run the commands below to configure the settings for remote access. The interface you select will depend
on how you've connected to the switch.
enable
configure device
interface <management|ethernet> <1/1>
no bridge-port
ip address <IP|DHCP>
exit
NOTE
The interface you select will depend on how you have connected to the switch (management or
ethernet).
no bridge-port is strongly recommended if you plan to use DHCP on an ethernet port.
3. You can see an output of the assigned configuration, including the IP information is using DHCP, using the
below command.
display ip interface brief
Use SSH to Access the Switch
Use the below command to SSH into the switch for access:
ssh admin@<IP>
©
Scale Computing 2018
C onnect to the
Switch
section above.
4