Lenovo RackSwitch G8272 Quick Start Manual - Page 4

Browse online or download pdf Quick Start Manual for Switch Lenovo RackSwitch G8272. Lenovo RackSwitch G8272 7 pages.
Also for Lenovo RackSwitch G8272: Quick Start Manual (24 pages), Product Manual (32 pages)

Lenovo RackSwitch G8272 Quick Start Manual
 
Setup the Switch for Remote Access 
Configure the IP Information 
1. Login to the switch using either option in the ​
2. Run the commands below to configure the settings for remote access. The interface you select will depend 
on how you've connected to the switch. 
enable
configure device
interface <management|ethernet> <1/1>
no bridge-port
ip address <IP|DHCP>
exit
 
  NOTE 
 
The interface you select will depend on how you have connected to the switch (management or
 
 
ethernet). 
 
no bridge-port is strongly recommended if you plan to use DHCP on an ethernet port. 
 
3. You can see an output of the assigned configuration, including the IP information is using DHCP, using the 
below command. 
display ip interface brief
 
 
Use SSH to Access the Switch 
Use the below command to SSH into the switch for access: 
ssh admin@<IP>
 
 
 
 
 
 
©
Scale Computing 2018
 
 
 
 
 
C onnect to the
Switch​
 
 
 
section above.