Lenovo RackSwitch G8296 빠른 시작 매뉴얼 - 페이지 15

{카테고리_이름} Lenovo RackSwitch G8296에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo RackSwitch G8296 22 페이지. Onie for lenovo network operating system

6. To check if the ONIE image was successfully installed on the switch, use the

following command:

Following is an example using the cp tftp command:

G8296# cp tftp tftp://10.72.97.98/onie-img/G8296-CNOS-10.2.1.0_ONIE.imgs

system-image onie vrf management

Confirm download operation? (y/n) [n] y

Download in progress

...

Copy Success

Install image...This takes about 90 seconds. Please wait

Valid image detected.

Check image signature succeeded

Extracting image: 100%

Installing ONIE:

Updating flash: 100%

Updating ONIE eeprom with manufacturing fields...

ONIE image installation succeeded.

ONIE image now contains Software Version 10.2.1.0

G8296# display boot

Current FLASH software:

active image: version 10.2.1.0

standby image: empty

Uboot: version 10.2.1.0

ONIE: version 10.2.1.0

Currently set to boot software active image

Currently scheduled reboot time: none

Current port mode: default mode

In the command output, the current ONIE image installed on the switch is

displayed under the Current FLASH software section.

ONIE on the G8296