Lenovo ThinkSystem NE1032 빠른 시작 매뉴얼 - 페이지 17

{카테고리_이름} Lenovo ThinkSystem NE1032에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo ThinkSystem NE1032 22 페이지. For lenovo cloud network operating system
Lenovo ThinkSystem NE1032에 대해서도 마찬가지입니다: 제품 설명서 (26 페이지), 빠른 시작 매뉴얼 (14 페이지)

페이지 인쇄

Booting in ONIE Uninstall Mode

To boot the switch in ONIE install mode on the next reload, use the following

command from the switch CLI:



Lenovo Cloud Network OS:

NE1032(config)# startup image onie-image install

To check which in ONIE mode the switch is configured to boot, use the following

command from the switch CLI:



Lenovo Cloud Network OS:

NE1032# display boot

Current ZTP State: Enable

Current FLASH software:

active image: version 10.4.2.0

standby image: version 0.0.0.0

Uboot: version 10.4.2.0

ONIE: version 10.4.2.0

Currently set to boot ONIE install mode

Currently scheduled reboot time: none

Current port mode: default mode

This mode is used to uninstall a NOS using ONIE. The ONIE uninstall mode boots

the ONIE kernel and deletes the NOS image running on the switch. After the

uninstall is complete, the ONIE discovery process is executed.

To boot the switch in ONIE uninstall mode on the next reload, use the following

command from the switch CLI:



Lenovo Cloud Network OS:

NE1032(config)# startup image onie-image uninstall

Note: The following warning is displayed after choosing ONIE uninstall mode.

You are prompted for confirmation:

WARNING: Booting ONIE in uninstall mode will completely uninstall the

operating system!

Only the ONIE image will be preserved.

Are you sure you want the next boot to uninstall the OS? (y/n)

Once you confirm, the switch boots in ONIE uninstall mode on the next reload. For

more details, see

"Uninstalling the Lenovo Network OS" on page

20.

ONIE on the NE1032