CTX S962A 서비스 매뉴얼 - 페이지 10
{카테고리_이름} CTX S962A에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CTX S962A 19 페이지. 19” sxga tft lcd display monitor
페이지 인쇄
C
T
X
C
T
X
C
T
X
Image
Language
OSD Position
Reset
3.6.5 Accessory OSD Indications
Signal out of range
No Signal Input and power down. When the signal cable is not plugged into PC or when the
3.7 Power Management
This monitor will meet the low power specification, Including USA governmental requirements
For Energy Star, the NUTEK standard and the VESA DPMS standard which detected the Hori. /Vert.
Sync signal from host CPU.
A dual color (green/amber) LED is located on the front bezel to indicate the power management
states.
Status
Sync.
Active
Active
No Sync. Blanked
Note. 1 : Audio function is operating at no signal input.
Once "Esc" or "△ " or "▽ " key initiates under power saving condition, the audio function
an be waked up and the power consumption can not be the above definition.
6500° K
User
Clock
Phase
H-Position
V-Position
Smooth
English(select)
German(select)
French(select)
Spanish(select)
Italian(select)
中文(option)
H-Position
V-Position
Center
Yes/No
Power
consumption
Video
43W max.
≦ 2W
(Note.1)
R/G/B select
Adjustment scale
Adjustment scale
Adjustment scale
Adjustment scale
On/Off
Adjustment scale
Adjustment scale
An input signal which is outside the range defined in
Section 3.4 shall cause the monitor to display a message
Signal Out of Range.
horizontal or vertical sync are absent and when the
monitor is turned on. After 5 sec isn't to detect H or V Sync
then show "No Signal Input" for 5 seconds and then show "
Power down" message on screen 2 sec. And then the
monitor shall go to power saving status. If first turn on the
monitor, shows "No Signal Input" 30 sec.
Power
Picture Recovery time
management
On
Power saving
10
Service Manual
S962A
Adjustment scale
LED Color
-
Green
Amber
≦ 3 sec