Dirt Devil 88150 소유자 매뉴얼 - 페이지 10
{카테고리_이름} Dirt Devil 88150에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dirt Devil 88150 12 페이지.
페이지 인쇄TOOL
REQUIRED:
PHILLIPS
SCREWDRIVER
WARNING:
TO REDUCE
THE R ISK OF INJURY
FROM
MOVING
PARTS
-UNPLUG
CLEANER
BEFORE
CHANGING
BELT OR BRUSHROLL.
TO REmovE
BELT
iBe, r style si
Lay cleanerflat and flip clean-
er to exposenozzlebase.Base
should layflat and face up. To
remove nozzle guard, use
Phillipsscrewdriverto remove
the tour (4) screws. Arrows
show locationof screws.
Lift nozzle guard off.
Slide belt off motor shaft.
TO REPLACE BELT OR BRUSHROLL
Lift and remove brushroll.
Dispose of old belt.
Place new belt in area of
brushroll without bristles.
Slide belt onto motorshaft.
With new belt in place, pull
andslide brushroll into nozzle
makingsurethat the brushroll
end caps are in the correct
orientation (Ta inset). Rotate
brushroll manually to make
sure belt is properly aligned.
Reattach nozzle guard.
lO
TAB
TAB
TAB
Secure by aligning the three
(3) tabs in the base slots.
Be sure to replace all four
(4) screws.