Dirt Devil 88150 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz Dirt Devil 88150. Dirt Devil 88150 12 stron.

Drukuj stronę
TOOL
REQUIRED:
PHILLIPS
SCREWDRIVER
WARNING:
TO REDUCE
THE R ISK OF INJURY
FROM
MOVING
PARTS
-UNPLUG
CLEANER
BEFORE
CHANGING
BELT OR BRUSHROLL.
TO REmovE
BELT
iBe, r style si
Lay cleanerflat and flip clean-
er to exposenozzlebase.Base
should layflat and face up. To
remove nozzle guard, use
Phillipsscrewdriverto remove
the tour (4) screws. Arrows
show locationof screws.
Lift nozzle guard off.
Slide belt off motor shaft.
TO REPLACE BELT OR BRUSHROLL
Lift and remove brushroll.
Dispose of old belt.
Place new belt in area of
brushroll without bristles.
Slide belt onto motorshaft.
With new belt in place, pull
andslide brushroll into nozzle
makingsurethat the brushroll
end caps are in the correct
orientation (Ta inset). Rotate
brushroll manually to make
sure belt is properly aligned.
Reattach nozzle guard.
lO
TAB
TAB
TAB
Secure by aligning the three
(3) tabs in the base slots.
Be sure to replace all four
(4) screws.