Nikon DS-5MC 사용 설명서 - 페이지 16

{카테고리_이름} Nikon DS-5MC에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon DS-5MC 49 페이지. Ds camera control unit, ds camera head, ds cooled camera head
Nikon DS-5MC에 대해서도 마찬가지입니다: 사용 설명서 (47 페이지), 빠른 참조 (15 페이지)

페이지 인쇄

Chapter 4

Connecting and Installing the Equipment

Installing the DS-U2

The DS-U2 can be positioned either horizontally or vertically.

• Horizontal installation

Set the DS-U2 horizontally on a flat surface.

Provide a clearance of approximately 100 mm around the product to dissipate heat.

• Vertical installation

Attach the vertical stand to the DS-U2 for setting the product in the vertical position.

Set the DS-U2 vertically on a flat surface as shown below.

Provide a clearance of approximately 100 mm around the product to dissipate heat.

Attach the vertical stand as follows:

Remove the two screws at the upper front position and the lower rear position among four screws

on the right side of the DS-U2. (See Figure A below.)

Then, fix the stand to the right surface of the DS-U2 using the removed screws. (See Figure B

below.)

Use an M2.5-size Phillips driver to attach or detach screws.

Figure A

Figure B

- 10 -