Nikon DS-5MC Instructions Manual - Page 16

Browse online or download pdf Instructions Manual for Camera Accessories Nikon DS-5MC. Nikon DS-5MC 49 pages. Ds camera control unit, ds camera head, ds cooled camera head
Also for Nikon DS-5MC: Instructions Manual (47 pages), Quick Reference (15 pages)

Print Page

Chapter 4

Connecting and Installing the Equipment

Installing the DS-U2

The DS-U2 can be positioned either horizontally or vertically.

• Horizontal installation

Set the DS-U2 horizontally on a flat surface.

Provide a clearance of approximately 100 mm around the product to dissipate heat.

• Vertical installation

Attach the vertical stand to the DS-U2 for setting the product in the vertical position.

Set the DS-U2 vertically on a flat surface as shown below.

Provide a clearance of approximately 100 mm around the product to dissipate heat.

Attach the vertical stand as follows:

Remove the two screws at the upper front position and the lower rear position among four screws

on the right side of the DS-U2. (See Figure A below.)

Then, fix the stand to the right surface of the DS-U2 using the removed screws. (See Figure B

below.)

Use an M2.5-size Phillips driver to attach or detach screws.

Figure A

Figure B

- 10 -