Nikon P-FLA2 사용 설명서 - 페이지 43

{카테고리_이름} Nikon P-FLA2에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon P-FLA2 43 페이지. Fluorescence attachment 2

Fluorescence photomicrography or TV

observation

To take photos or to monitor fluorescence images, attach the fluorescent

attachment port P-FLAP or P-FLAP2 onto the port mount. And then,

attach the proper adapter and a photomicrographic device or high sensitive

TV camera. (Examples follow: The direct photo tube and the PL

projection lens are required for the photomicrographic device. The C-

mount direct TV adapter is required for the TV camera.) The P-IBSS

beam splitter S/S2 and P-IBSD beam splitter D/D2 cannot be used for this

purpose. Be careful.

When taking a photo or monitoring an image, move the optical path

switchover lever to the "PHOTO" position. The image passes the optical

path for the port. (Note that when the lever is set to the "PHOTO"

position, the image cannot be observed through the left eyepiece.) Please

refer to the instruction manual of the photomicrographic device or the TV

camera for details about the photomicrography or image monitoring.

For photomicrography

When using a fluorescent specimen, the florescence may fade during

exposure. To avoid this, use the high-sensitive film. Use "Tri-X

(ISO400)" for monochrome shots, and for color shots, use daylight-type

high-sensitive film, such as "Kodak Ektachrome 400 (ISO400)" or

"Fujichrome 400 (ISO400)".

For TV observation

When monitoring a sample using a high-sensitive TV camera, it is

sometimes best to insert an infrared (IR) cut filter in front of the camera

receptor. Experiment, and use the IR cut filter when needed.

Usage

III

E-23