Nikon E800 사용 설명서 - 페이지 16

{카테고리_이름} Nikon E800에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon E800 22 페이지.
Nikon E800에 대해서도 마찬가지입니다: 사용 설명서 (9 페이지), 사용 설명서 (42 페이지)

5. Assembly

Confirm that the power supply power switch is off (i.e., that it is flipped to the " ' " side).

Also confirm that the sub-power switch on the microscope is in the OFF position.

If the lamphouse is mounted on the microscope, use a hexagonal screwdriver to loosen the

lamphouse clamp screw (The screw is on the top of the lamphouse mount) and then remove

the lamphouse from the microscope.

Use a hexagonal screwdriver to loosen the clamp screw on the front of the lamphouse and

remove the cover.

While pressing the lamp clamp lever, push the lamp into the socket pin holes as far as it will

go. (Do not touch the glass portion of the lamp with your bare hands.)

Return the clamp lever to its original position. Make sure that the lamp is not crooked.

Close the cover securely and tighten the clamp screw.Make sure that the cover is fixed in

place and will not come off even when shook by hand.

Plug the lamphouse into the microscope so that the lamphouse plug fits into the lamphouse

socket. Tighten the lamphouse clamp screw to secure the lamphouse in place.

■ 4. Stage Installation

Place the stage with the bottom facing up. Place the substage on top of the stage. Align the three

mounting holes on the stage and the substage, and then use a hexagonal screwdriver to tighten the

three mounting bolts so that the stage is securely attached to the substage.