Nikon E800 Manual de instruções - Página 16

Procurar online ou descarregar pdf Manual de instruções para Microscópio Nikon E800. Nikon E800 22 páginas.
Também para Nikon E800: Manual de Instruções (9 páginas), Manual de instruções (42 páginas)

Imprimir página

5. Assembly

Confirm that the power supply power switch is off (i.e., that it is flipped to the " ' " side).

Also confirm that the sub-power switch on the microscope is in the OFF position.

If the lamphouse is mounted on the microscope, use a hexagonal screwdriver to loosen the

lamphouse clamp screw (The screw is on the top of the lamphouse mount) and then remove

the lamphouse from the microscope.

Use a hexagonal screwdriver to loosen the clamp screw on the front of the lamphouse and

remove the cover.

While pressing the lamp clamp lever, push the lamp into the socket pin holes as far as it will

go. (Do not touch the glass portion of the lamp with your bare hands.)

Return the clamp lever to its original position. Make sure that the lamp is not crooked.

Close the cover securely and tighten the clamp screw.Make sure that the cover is fixed in

place and will not come off even when shook by hand.

Plug the lamphouse into the microscope so that the lamphouse plug fits into the lamphouse

socket. Tighten the lamphouse clamp screw to secure the lamphouse in place.

■ 4. Stage Installation

Place the stage with the bottom facing up. Place the substage on top of the stage. Align the three

mounting holes on the stage and the substage, and then use a hexagonal screwdriver to tighten the

three mounting bolts so that the stage is securely attached to the substage.