Nikon Elcipse TE2000 사용 설명서

{카테고리_이름} Nikon Elcipse TE2000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon Elcipse TE2000 7 페이지. Fluorescent microscope
Nikon Elcipse TE2000에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지)

페이지 인쇄

Wellcome Trust Centre for Human Genetics

Molecular Cytogenetics and Microscopy Core

Using the Nikon TE2000 Inverted Microscope

Colour

image acquisition using NIS-Elements

[Basic Research] software and the Nikon

Digital Sight DS-5M

Handle the microscope gently, taking care to avoid sharp impacts.

TO SWITCH-ON THE MICROSCOPE AND LOOK AT YOUR SAMPLE:

Bright-field Microscopy Imaging [with the Colour Camera]:

Turn on the transmitted light by turning on the switch on the Nikon power

supply box on the bench to the left side of the microscope.

Press "lamp on/off" button at the base of the microscope on the left.

Adjust the light intensity by rotating the control dial situated on the left side of

the microscope, below the on/off switch.

For bright-field [non-fluorescence] transmission imaging: Check that the "D"

(Diffuser) and "HA" (Heat Absorber) filters at the top left of the microscope are

pushed in. Select the optional neutral density ND filters as necessary to dim the

light intensity [top right]: ND16 and ND2 – push both in for maximum light

attenuation, normally the best setting.

The "eyepiece turret" dial should be set to O (open), when set to C it is closed.

The "port/optical path" dial on the right side of the base should be set to port 1.

All the light now goes to the microscope eyepieces and none to the cameras.

The "reticule in/out" lever at front of the base to the right should be turned

clockwise and set to a 2 o'clock position. This lever is under the colour camera.

Colour

INSTRUCTIONS

PLEASE HANDLE CAREFULLY!

Camera