Nikon Live Cell 2 매뉴얼 - 페이지 12
{카테고리_이름} Nikon Live Cell 2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon Live Cell 2 14 페이지.
Z-stacks
Although not an ideal imaging mode for wide-field techniques due
to the presence of out-of-focus light, it is possible to perform Z-
stacks which may be used for 3D visualisation or for maximum
intensity projections. Select the Z-stack tab in the ND Acquisition
window (Fig. 28).
1. Press reset to remove any previously saved z-positions.
2. Three options are available for setting Z-stack limits: Top
and Bottom (mark the limits of the stack), Symmetric
(mark the centre of the stack) and Asymmetric (set the
number of slices above and below the centre).
3. For the top-bottom option, whilst live imaging, adjust the
focus to find the top of your sample (use the Z value as a
guide) and click Top. Focus back through the sample to do
the same for the bottom plane of the sample. Stop imaging
to avoid sample bleaching.
11
Nikon Imaging Centre @ King's College London
Nikon
King's College London
Imaging Centre
Fig. 27
Fig. 28