Nikon SMZ660 사용 설명서 - 페이지 12

{카테고리_이름} Nikon SMZ660에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon SMZ660 29 페이지. Stereoscopic zoom microscope

Assembly

Place the stand on the level surface.

Mount the stage plate.

Fit the stage plate into the stand base while

pushing it against the rim in the direction

shown by the arrow in the illustration.

The stand arm can be lowered. (If you

do not need to lower the arm, jump to

step 4.)

Use the hexagonal wrench (large - supplied

with the focusing stand) to loosen the arm

fixing screw. Reattach the arm using the

screw hole at the lower side of the vertical

slider. The arm will become 55 mm lower

than its original position. Before tightening

the screw, make sure that the two pins on the

arm fit in the grooves on the vertical slider.

Mount the zooming body.

Lightly tighten the zooming body clamp

screw to hold the zooming body on the arm.

Note) Do not over-tighten the zooming body

clamp screw since it may cause

damage to the instrument.

Groove