Nikon SMZ660 사용 설명서 - 페이지 14

{카테고리_이름} Nikon SMZ660에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon SMZ660 29 페이지. Stereoscopic zoom microscope

III

Usage

Adjust the torque of the focus knob so as not

to fall down the zooming body on its own

weight.

This adjustment should be performed every

time the observer is changed since the

interpupillary distance differs between

individuals. Adjust the interpupillary distance

so that the view field for each eye is merged

into one. Move while holding each sleeve

with both hands.

This adjustment should be performed every time the observer is changed

since the eyesight differs between individuals.

1 Turn the diopter rings on both eyepieces to set them at the 0 position

(match the 0 line with the index line).

2 Turn the zooming knob to 5X. Focus on the sample using the focus

knob. (Refer to "2. Focusing".)

3 Turn the zooming knob to 0.8X. Peering through the left eyepiece

with the left eye, focus on the sample using the diopter ring on the

left eyepiece. Then, peer through the right eyepiece with your right

eye and focus on the sample using the diopter ring on the right

eyepiece.

4 Repeat steps 2 and 3 until the image is kept focused even though the

zooming magnification is changed. This adjustment ensures sharp

image throughout the zooming range.

Increasing the torque.

(To reduce the torque,

turn the knob in the direction

opposite to the arrow.)