Cub RV Blind Spot Detection System 설치 매뉴얼 - 페이지 8

{카테고리_이름} Cub RV Blind Spot Detection System에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cub RV Blind Spot Detection System 12 페이지. Detection system

5. INSTALLATION

13. Pass the harness through the grommet ensuring the harness and connector do not

become damaged. Route the harness to the desired location which the Control Unit

will be installed.

14. Instructions for A. indicator, B. buzzer & C. BSD power button.

A. Select locations for the right & left indicators to be installed, check for clearance

behind the panel. Mark the locations to be drilled with the provided tool. Drill holes.

Snap into place.

B. Locate a suitable location for the buzzer around the A pillar for maximum effect and

ease of installation. Affix the buzzer using the adhesive patch or wire ties.

C. Locate a suitable location for the BSD power button which is accessible to the driver,

inspect the area behind the panel for clearance. Drill a hole for the button and insert

the button into the hole.

6 | RV BLIND SPOT DETECTION SYSTEM: For Motorhomes