Cub RV Blind Spot Detection System Instrukcja instalacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Samochody kempingowe Cub RV Blind Spot Detection System. Cub RV Blind Spot Detection System 12 stron. Detection system
Drukuj stronę5. INSTALLATION
13. Pass the harness through the grommet ensuring the harness and connector do not
become damaged. Route the harness to the desired location which the Control Unit
will be installed.
14. Instructions for A. indicator, B. buzzer & C. BSD power button.
A. Select locations for the right & left indicators to be installed, check for clearance
behind the panel. Mark the locations to be drilled with the provided tool. Drill holes.
Snap into place.
B. Locate a suitable location for the buzzer around the A pillar for maximum effect and
ease of installation. Affix the buzzer using the adhesive patch or wire ties.
C. Locate a suitable location for the BSD power button which is accessible to the driver,
inspect the area behind the panel for clearance. Drill a hole for the button and insert
the button into the hole.
6 | RV BLIND SPOT DETECTION SYSTEM: For Motorhomes