3Com 3108 코드 매뉴얼 - 페이지 9

{카테고리_이름} 3Com 3108에 대한 코드 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com 3108 16 페이지. Nbx feature codes guide for sip telephones
3Com 3108에 대해서도 마찬가지입니다: 참조 매뉴얼 (2 페이지)

페이지 인쇄

Overview

General

Instructions

EATURE

This guide describes the NBX features that are accessible on 3Com 3108

Wireless Telephones and third-party IP telephones that are connected to

the NBX system running in SIP mode. This guide focuses primarily on the

NBX feature code sequences and covers these topics:

Overview

General Instructions

Using the NBX NetSet Utility

How to Enter a Feature Code

SIP, the Session Initiation Protocol, is a signaling protocol for Internet

conferencing, telephony, and instant messaging. NBX 6.0 allows for SIP

integration of generic IP phones with 3Com legacy devices when the NBX

is running in SIP mode. For more information on the NBX system running

in SIP mode, see your NBX administrator.

To access most of the NBX features on a 3108 Wireless or generic IP

telephone, press * and enter a 3-digit code. Arguments should have a *

before and after only if more arguments or extensions are to be added.

For example, you would enter the sequence *465*1000 and press Send

to forward all calls to extension 1000.

For complete descriptions of the NBX telephone features described in

Table

3, log in to the NBX NetSet utility (see

Utility") and click the Help button for information about the specific

topics. Then use this guide to access the features that are available using

your IP telephone.

ODES

"Using the NBX NetSet