Dirty Hand Tools 101100 운영 매뉴얼 - 페이지 19

{카테고리_이름} Dirty Hand Tools 101100에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dirty Hand Tools 101100 20 페이지. 2” diameter semi-trash pump 7hp/208cc engine

AIR FILTER

MUFFLER

COVER

Storage

SPARK

PLUG

WIRE

1. Wait for the engine to cool, then clean the engine with a

clean cloth.

CYLINDER

2. When the semi-trash pump is to be stored for longer

ASSEMBLY

than 20 days, prepare the engine for storage by emptying

the fuel tank and draining all fuel lines.

3. Remove the drain bolt from the bottom of the carburetor

bowl and allow the fuel to drain.

4. Clean out area around spark plug and remove. Pour

one tablespoon of engine oil into the cylinder through

DRAIN

the spark plug hole. Reinstall the spark plug, but leave

PLUG

the spark plug wire disconnected. Pull recoil starter

BOLT

handle to distribute oil in the cylinder. Stop after one

or two revolutions when you feel the piston start the

compression stroke (when you start to feel resistance).

5. Apply a thin coat of rust preventive oil to all uncoated

metal parts.

6. Cover and store in a dry, well-ventilated area out of reach

of children and away from water heaters, clothes dryers,

furnaces and other ignition sources.

WARNING

Drain the fuel tank in a well-ventilated area

away from ignition sources. If the engine is

hot from use, shut the engine off and wait

for it to cool before draining fuel.

Do not smoke near the fuel tank.