Dirty Hand Tools 101100 Kullanım Kılavuzu - Sayfa 19
Su Pompası Dirty Hand Tools 101100 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Dirty Hand Tools 101100 20 sayfaları. 2” diameter semi-trash pump 7hp/208cc engine
Sayfayı YazdırAIR FILTER
MUFFLER
COVER
Storage
SPARK
PLUG
WIRE
1. Wait for the engine to cool, then clean the engine with a
clean cloth.
CYLINDER
2. When the semi-trash pump is to be stored for longer
ASSEMBLY
than 20 days, prepare the engine for storage by emptying
the fuel tank and draining all fuel lines.
3. Remove the drain bolt from the bottom of the carburetor
bowl and allow the fuel to drain.
4. Clean out area around spark plug and remove. Pour
one tablespoon of engine oil into the cylinder through
DRAIN
the spark plug hole. Reinstall the spark plug, but leave
PLUG
the spark plug wire disconnected. Pull recoil starter
BOLT
handle to distribute oil in the cylinder. Stop after one
or two revolutions when you feel the piston start the
compression stroke (when you start to feel resistance).
5. Apply a thin coat of rust preventive oil to all uncoated
metal parts.
6. Cover and store in a dry, well-ventilated area out of reach
of children and away from water heaters, clothes dryers,
furnaces and other ignition sources.
!
WARNING
Drain the fuel tank in a well-ventilated area
away from ignition sources. If the engine is
hot from use, shut the engine off and wait
for it to cool before draining fuel.
Do not smoke near the fuel tank.
19