DIRTY HANDS 107555 운영 매뉴얼 - 페이지 16

{카테고리_이름} DIRTY HANDS 107555에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DIRTY HANDS 107555 20 페이지. 14”-22” adjustable front tine tiller

Operating Instructions

Read Operation Manual before using this equipment!

Practice operating the controls and using the tiller with tines out

of ground before beginning to till.

Tilling

1. Start the engine.

2. Move the throttle control to fast.

3. Place the tiller in forward by pulling up on the forward clutch

lever - this will engage the tines.

Note: You can slow the tiller's forward advance at any time by

putting slight downward pressure on the handlebars. Stop the tiller

by releasing the clutch lever and then stopping the engine.

Pulling the clutch lever toward the handlebar engages the tines.

Releasing the clutch lever stops the tines (see Figure 9).

The key to successful tilling is to begin with a shallow cut on the first

pass, and then work an inch or two deeper on each successive pass.

• Tilling depth will vary with ground conditions.

• When beginning to till in unbroken ground or in extremely hard

soil perform shallow tilling first then do a second pass going deeper

into the soil.

• Hold on firmly to the handlebars to control sudden lurches.

Immediately release the clutch lever if the tines jam or you strike

a foreign object. With the clutch lever released, push the throttle

control to stop position to stop the engine. When tines have

stopped, disengage the spark plug wire, then remove foreign objects.

WARNING

Pulling the clutch lever

towards the handlebar

engages the tines.

Figure 9