DIRTY HANDS 107555 Bedieningshandleiding - Pagina 16
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} DIRTY HANDS 107555. DIRTY HANDS 107555 20 pagina's. 14”-22” adjustable front tine tiller
Pagina afdrukken
Operating Instructions
Read Operation Manual before using this equipment!
Practice operating the controls and using the tiller with tines out
of ground before beginning to till.
Tilling
1. Start the engine.
2. Move the throttle control to fast.
3. Place the tiller in forward by pulling up on the forward clutch
lever - this will engage the tines.
Note: You can slow the tiller's forward advance at any time by
putting slight downward pressure on the handlebars. Stop the tiller
by releasing the clutch lever and then stopping the engine.
Clutch Lever
Pulling the clutch lever toward the handlebar engages the tines.
Releasing the clutch lever stops the tines (see Figure 9).
Tilling Tips
The key to successful tilling is to begin with a shallow cut on the first
pass, and then work an inch or two deeper on each successive pass.
• Tilling depth will vary with ground conditions.
• When beginning to till in unbroken ground or in extremely hard
soil perform shallow tilling first then do a second pass going deeper
into the soil.
• Hold on firmly to the handlebars to control sudden lurches.
Immediately release the clutch lever if the tines jam or you strike
a foreign object. With the clutch lever released, push the throttle
control to stop position to stop the engine. When tines have
stopped, disengage the spark plug wire, then remove foreign objects.
16
!
WARNING
Pulling the clutch lever
towards the handlebar
engages the tines.
Figure 9