Aerco AM Series 기술 지침 - 페이지 5

{카테고리_이름} Aerco AM Series에 대한 기술 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Aerco AM Series 10 페이지. Gas-fired boilers and water heaters venting application
Aerco AM Series에 대해서도 마찬가지입니다: 애플리케이션 매뉴얼 (8 페이지), 애플리케이션 매뉴얼 (20 페이지)

페이지 인쇄
Aerco AM Series 기술 지침
AM Series Thermal Insulation Replacement Instruction
1.
Referring to Figure 5, unscrew the four nuts labeled "B."
2.
Remove the entire fan and burner assembly, labeled "C."
Figure 5: Removing the Fan and Burner Assembly
5. Replacing Heat Exchanger's Thermal Insulation
Thermal insulations must be checked every year for any damage, including cracks, chips, or
other damage. If any damage is found they must be replaced.
These instructions will be repeated on each burner in the unit.
Replacing
1.
Unscrew nut from the thermal insulation (see Figure 6).
2.
Use a screwdriver to remove the thermal insulation.
3.
Prepare the screw and the washer to fix the new thermal insulation (see Figure 7).
Figure 6: Screw & Thermal Insulation
07/28/2014
AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, New York 10913 • Phone: 800-526-0288
Kit # 62632006
Removing the Burner – Continued
the Heat Exchanger's Thermal Insulation
Figure 7: Screw & Washer
TID-0120_0A
Page 5 of 10