Blade 200 SR X 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Blade 200 SR X에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Blade 200 SR X 7 페이지.

Gain Parameter 4 = Motor Power Adjustment (H4 – Wert R im Flight log Bildschirm)

Default = 100% - (kann bis auf 200% hochgesetzt werden)

Higher values result in a faster climb rate but may result in the tail drifting during fast accelerations. After

adjusting the motor power, tail rotor gain adjustment may be necessary.

Exiting Gain Adjustment Mode

1. To save the adjustments, lower the throttle stick to the lowest position and release the sticks.

2. Press and hold the bind/panic switch until the swash servos move.

3. Release the bind/panic switch to save the gain adjustments.

4. The model is ready to fly.

Exit und Speichern

Den Bindeknopf drücken und warten bis sich die Servos bewegen – sobald die Servos wieder in

Ruhestellung sind den Bindeknopf loslassen – die Werte sind dann gespeichert – der Heli ist

bereit.