Blade 200 SR X 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} Blade 200 SR X에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Blade 200 SR X 7 페이지.

B: Gain Parameter 2 Value (H2, B – Tail Rotor Gain)

L: Gain Parameter 3 Value (H3, L – Filtering Adjustment)

R: Gain Parameter 4 Value (H4, R – Motor Power)

Inflight Vibration Analysis for Telemetry-Enabled Transmitters

Enabled=Fore/aft servo moves several times.

Disabled=Fore/aft servo moves once then returns to center.

Once enabled, the Flight Log Screen on your telemetry-enabled transmitter will show:

F: Current Vibration Level (1–9999)

A: Maximum Vibration Level (1–9999)

B: Current Roll Attitude Estimate

L: Current Pitch Attitude Estimate

R: Current Yaw Attitude Estimate (resets to 0 when the stick is at the stop position)

Use this function to compare vibration levels on your model before and after making changes, such as balancing

main rotor blades, replacing a bent main shaft, etc. The vibration level numbers are not calibrated to a vibrational

acceleration level, but are meant for comparison purposes. For example, if the vibration level decreases after

balancing the main rotor blades, you will have at least some data indicating the rebalancing was successful.

Blade and the Horizon Hobby logo are registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with

permission of Bachmann Industries, Inc.

Patents pending.

Created 5/14

45217