Army Aviation TCS Series 매뉴얼 - 페이지 13

{카테고리_이름} Army Aviation TCS Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Army Aviation TCS Series 19 페이지.

1. In the condition of power on, hold on 【redisplay/calibration】

key for 3 second and enter in calibration mode to

display"CAL".

2. Confirm no load on the pan and press【M+/SMPL】key to

perform zero point calibration ,display "zero" on screen,

then display "value of weight to load".

3. If" value of weight to load" need be changed, respectively

press 【TARE】 key to move and press 【ZERO】 key to change

the value of weight to load.

4. Put required weight on the pan for 3-5 seconds and press

【M+/SMPL】key to display "SPAN", and display "PASS"

to return by it self in weighing mode.

5.7 UNIT SETTING (UNAPPROVED)

In general, the units need not reset because they were

already set before delivery. If setting need, the steps are

shown as the followings, units :kg， lb， oz， PCS， %， GSM，

Notice: The units kg and g are only allowed by rules to be

legal measure unit.