Discount Car Stereo BKR-HF 빠른 시작 설치 매뉴얼 - 페이지 6
{카테고리_이름} Discount Car Stereo BKR-HF에 대한 빠른 시작 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo BKR-HF 14 페이지.
페이지 인쇄Tuck and secure any extra wire away from moving parts and test operation
4.
See Initial Radio Setup
(
)
The radio cavity in most vehicles may lack extra room needed to fit
aftermarket equipment and because of that you will have to be creative
when fitting this part. Extra length cables are provided to allow for
flexibility.
Secure module and proceed to section "Initial Radio Setup".
9.
CDR30/31 Installation
Remove CDR30/31 radio from the dashboard to gain access to the
connectors. (Radio removal not covered in these instructions but may be
available upon request)
With radio removed disconnect 12-pin green sub-plug from factory
1.
Quadlock (See Fig. 19)
Factory Quadlock Plug and micro-Quadlock
Fig. 19
Alert!
Factory 12-pin micro Quadlock (Green for AUX and Blue for
Bluetooth) are pictured above. The Green micro-Quadlock must be
disconnected and replaced with black micro-Quadlock plug on adapter
harness. (See Fig. 2)
On Vehicles with no options, both slots are
vacant.
Connect adapters black 12-pin micro-Quadlock plug to slot vacated in
2.
step 1 (See Fig. 2)
Fig. 20
Black micro-Quadlock plug from Adapter harness
Green micro-Quadlock plug remains disconnected
Secure adapters Black wire to chassis ground. One option is to
3.
remove one of the radio chassis screws and secure black wire as seen
in Fig. 21or secure to any metal or ground wire.
(See Fig. 20)