BLADEZ PB-SE802 핸드북 - 페이지 13
{카테고리_이름} BLADEZ PB-SE802에 대한 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. BLADEZ PB-SE802 18 페이지. Gas powerboard powered personal transportation
페이지 인쇄
- 1. Engine Oil
- 2. Table of Contents
- 3. Getting to Know Your Bladez Power Board
- 4. Package Contents
- 5. Getting Started
- 6. Folding and Storage
- 7. Operating Procedures
- 8. Maintenance
- 8. Recommended Tools
- 8. Carburetor Adjustment
- 8. Braking System
- 8. Tires and Wheels
- 8. Adjusting the Head Unit
- 8. Adjusting the Belts
- 9. Maintenance Schedule
- 10. Other Questions
WARNING!
When the engine is idling, under no circumstances should your MOBY
be moving.
If the MOBY continues to move after idle speed adjustment, contact
Bladez or your local Bladez service center.
Cleaning the Air Filter
It is a good idea to occasionally clean the air filter to insure optimum
performance.
BRAKING SYSTEM
The MOBY uses both a front wheel disc/calliper system activated by a hand lever
(on the left side of the handlebar) and a rear friction foot brake. The front brake is
activated by squeezing the BRAKE LEVER with your left hand. Make sure to release
the THROTTLE LEVER when engaging the brakes.
Practice braking on a smooth, dry surface to get used to the feel of the braking
system. Braking distance is affected by wet conditions and loose and uneven riding
surfaces.
Adjusting the Brakes
The Brakes on the MOBY should come fully adjusted from the factory.
However, it may be necessary to adjust the brake from time to time.
To clean the air filter:
1. Using a Philips head screwdriver,
remove the carburetor cover by turning
the cover screw counter clockwise. (Fig.
10)
2. Remove and clean the air filter (the
spongy material on top of the air intake),
with a damp rag. (Fig. 11)
3. Put the air filter back into its original
position and replace the cover.
Page 13 of 18