Blagdon Midipond 20000 매뉴얼 - 페이지 12

{카테고리_이름} Blagdon Midipond 20000에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Blagdon Midipond 20000 16 페이지. Uv pond filter system

MAINTENANCE & CLEANING

Polymer wool and carbon cartridge

When the cartridge chamber fills with water and starts to overflow into the outlet chamber the

cartridge should be cleaned or replaced.

The Polymer wool pad may be washed a limited number of times before it starts to lose efficiency

and blocks rapidly.

The Carbon Foam pad contains activated carbon particles that remove colorants and chemical

pollutants from your pond water. After six weeks the activated carbon pad must be replaced as the

carbon becomes full with pollutants and will be unable to absorb more from the pond water.

Replacement packs of polymer wool and carbon foam pads will be available from your retailer and

are quick and easy to replace. (see diagram on page 8 and codes/descriptions on page 2)

Annual Maintenance

Check for wear

Once a year you should dismantle your Midipond filter. Dismantle the filter examining all the parts

for wear or damage, replacing any parts show obvious signs of wear or damage. (see getting to

know your Midipond filter for replacement codes and parts descriptions on page 2).

Replacing foams

After prolonged use and cleaning the filter foams will become damaged. This can be identified by

their inability to return quickly into shape after cleaning.

Replacement of the foams is recommended.

The filter can be run year round if the pump flow is maintained, this is the best option. Alternatively in

winter the filter may be switched off. Follow annual maintenance procedure and store frost-free in the

house or garage until spring.

17.562 Blagdon_Midipond filter instructions_20000/28000 AW.indd 13

17/07/2017 16:35