3D Creations North American P 51 D Mustang 조립 지침 매뉴얼 - 페이지 12

{카테고리_이름} 3D Creations North American P 51 D Mustang에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Creations North American P 51 D Mustang 15 페이지. Paper scale model kit

페이지 인쇄

3D Creations North American P 51 D Mustang 조립 지침 매뉴얼

Cut out parts #33,34,34A and 35 along the black

boarder that surrounds them. Glue these parts to a

piece of cardboard then cut them out individually.

Cut a toothpick to length and super glue it to the

backside of part #33 as shown in figure 35. Next

glue parts #35 to the backside of part #33 on each

side of the toothpick. Apply part #34 with super

glue as seen in figure 35. Now glue part 34A flat

to the top of the piece. Cut out part #40. Score this

part and fold it in half along it length. Apply glue

to the backside of this piece and glue them

together. Score and fold this piece again along the

lines indicated in figure 36.

Mount the tail wheel doors to the fuselage and

the tail wheel in the center of the doors as shown

in figure 37.