3D Global DTC133UHL 사용 설명서 - 페이지 13

{카테고리_이름} 3D Global DTC133UHL에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Global DTC133UHL 18 페이지.

3.6 General safety instructions

• Do not expose the device to rain or moisture, otherwise short circuits or electric

shocks may occur.

• Lay connecting cables in such a way that they do not pose a danger

• Disconnect the device completely from the mains if it is not to be used for a longer

period of time. We recommend unplugging the mains cable to completely disconnect

the device from the mains.

• The system must be immediately disconnected from the mains and must not be used

again, and qualified electrical personnel must be contacted and informed if:

o The mains cable, devices or assemblies of the system, the housing or parts

thereof are damaged

o Liquid or objects get into the device

• Ensure that all cable connections on the device are freely accessible.

• The ventilation openings of the device must not be covered, as this can lead to a

build-up of heat inside the device. The device must not be operated directly next to

heat sources. Ensure adequate ventilation.

• There must be at least 15 cm clearance on all sides of each device from walls,

ceilings, shelves, etc. to ensure a sufficient circulation of air.

• Do not open the housing, as there may be components inside that are possibly under

high voltage. There are no components inside the device that can be serviced or

replaced by the user.

• Opening the housing, repairs, modifications or conversions to the device or attempts

to do so will result in the immediate voiding of any warranty/liability claims against 3D

Global Solutions unless these have been expressly approved in writing by 3D Global

Solutions.

Manual_DTC133UHL_EN

Rev. 1.0 / 17.11.2022

13 / 18