3D Hobby Shop SLICK 540 조립 설명서 - 페이지 16
{카테고리_이름} 3D Hobby Shop SLICK 540에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Hobby Shop SLICK 540 19 페이지.
페이지 인쇄15
Install the servo as shown, and use medium or thick CA glue to install the aileron horn into the aileron as
shown.
Assemble aileron pushrod onto servo arm, exactly as you assembled the elevator control system. Be
sure the 2mm nut on the control horn is locked in place with CA glue.