3D Hobby Shop SLICK 540 조립 설명서 - 페이지 17
{카테고리_이름} 3D Hobby Shop SLICK 540에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Hobby Shop SLICK 540 19 페이지.
페이지 인쇄16
Remove the covering over two of the open bays in the bottom of the fuselage for battery/motor cooling.
Mount the receiver either to the fuselage side or to the balsa piece marked "Rx" and glue into fuselage.
Mount the lipo battery to the battery tray using the included Velcro strip and Velcro "seatbelt" strap.
Plug your servos and ESC into your receiver, attach your battery and test your radio system. Check for
correct motor running direction now, before your prop is installed. Never run your motor inside a