3D Hobby Shop SLICK 540 Посібник з монтажу - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник з монтажу для Іграшка 3D Hobby Shop SLICK 540. 3D Hobby Shop SLICK 540 19 сторінок.

Remove the covering over two of the open bays in the bottom of the fuselage for battery/motor cooling.

Mount the receiver either to the fuselage side or to the balsa piece marked "Rx" and glue into fuselage.

Mount the lipo battery to the battery tray using the included Velcro strip and Velcro "seatbelt" strap.

Plug your servos and ESC into your receiver, attach your battery and test your radio system. Check for

correct motor running direction now, before your prop is installed. Never run your motor inside a