AROHA SM11W 빠른 참조 매뉴얼 - 페이지 6

{카테고리_이름} AROHA SM11W에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AROHA SM11W 20 페이지.

Connect to your Wifi network

1. Make sure that your bluetooth is
activated and your Wi-Fi network
supports the 2.4GHz band
2. Scan the QR code on the right → or
search for the "Smart Life" app on the
Google Play or Apple APP Store and
install the application.
3. Open the "Smart Life" app and create
an account by following the instructions
4. Select the "Home" tab(
"Add Device"
Now you have 2 options:
a) press the test button on the smoke detector 4 times until the red light starts
blinking. The app should detect the smoke detector automatically.
b) If that doesn't work, Click the "Scan" button( ) in the upper right corner and
scan the QR code below.

Maintenance and Cleaning

There are a few simple steps you need do to keep it working properly:
1. Test the smoke detector once a month.
2. Do not paint the smoke detector. Paint will seal the vents and interfere with
the sensor's ability to detect smoke.
3. Never attempt to disassemble the smoke detector to clean inside. This will
damage the alarm.
4. Clean the smoke detector at least once a month to remove dust, dirt or
debris. Use a vacuum cleaner with a soft brush and vacuum all sides and
covers of the smoke detector.
Trouble Shooting
Problem
The smoke detector does
not sound when testing
Red LED flashes and the
smoke detector delivers
one beep every 60
seconds
) and click
Follow the instructions to complete the pairing
process. Please note you can skip the battery
question as your smoke alarm has already a
non-replaceable battery installed.
Please check whether the smoke detector is
activated.
The battery is low.
Method of disposal