3D Hobby Shop 59" AJ Slick 설치 매뉴얼 - 페이지 8

{카테고리_이름} 3D Hobby Shop 59" AJ Slick에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Hobby Shop 59" AJ Slick 20 페이지.

Check the stabilizer to make sure it is level to the wing tube. A slight variation here will not affect fight

performance. If you need to level the stabilizer, sand the mounting slot as needed, and use a piece of

cardstock as a shim in the slot as necessary.

When stabilizer is centered and aligned, drip Thin CA glue onto the stab-to-fuselage joint top and bottom.

NOTE: We do not remove any covering form the horizontal stabilizer. This keeps the stabilizer strong,

and thin CA makes an excellent joint to covering material. If your stab joint is not tight enough for thin CA

glue, or if you have to trim the opening to align the stab, you can use thick CA glue as well.