3D innovations DeskCycle Vive 사용자 설명서 - 페이지 4

{카테고리_이름} 3D innovations DeskCycle Vive에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D innovations DeskCycle Vive 12 페이지.

Assembly

Bike
Nut
Washer
Nut
Washer
Front Leg
Rear Leg
Bolts
Install the Legs
The front leg is longer than the rear leg. See the drawing above.
1. Place the bike on a flat surface.
2. Attach each leg to the bike with 2 bolts, 2 washers and 2 nuts as shown in the diagram.
3. Tighten all 4 nuts by hand.
4. Make sure all 4 feet sit flat on the surface. Rotate the feet if necessary.
5. Finish tightening the nuts using the provided wrench.
2