3D innovations DeskCycle Vive 사용자 설명서 - 페이지 5

{카테고리_이름} 3D innovations DeskCycle Vive에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D innovations DeskCycle Vive 12 페이지.

Left Pedal

The letter L is marked on

the end of the pedal shaft.

Install the Pedals

There is a Left Pedal and a Right Pedal. They are marked with an L for Left or an R for Right on the end

of the pedal shaft.

•

Screw the Left Pedal into the Left Pedal Arm COUNTER-CLOCKWISE.

•

Screw the Right Pedal into the Right Pedal Arm CLOCKWISE.

Tips for Installing the Pedals:

1. Make sure the pedal is straight when you screw it in.

2. Rotate the shaft with your fingers to get the threads

started.

3. If you can't get the threads started with your fingers

then it is cross threaded. Unscrew the pedal, make sure

the pedal is straight, and then try again.

Insert the Batteries into the Display

The display snaps into the bike. It's connected to the bike by a

wire at the bottom of the display.

1. Carefully pry the top of the display out using your fingers.

2. Install two AAA batteries into the back of the display. Pay

attention to the polarity. The battery holder shows the proper

polarity.

3. Press the display back into the bike.

Assembly (continued)

Right Pedal

The letter R is marked on

the end of the pedal shaft.